- Restart your computer.
- Quit any DAW or MIDI software and restart the SenselApp
-
Make sure you are plugged into a USB port or powered USB hub. This rules out any middle-device issues.
-
Leave the Morph plugged in, hold down the button for 8 seconds, and then press the button again. All the lights on the Morph should flash. If they do not, let us know.
-
If the Morph is recognized, you should see it on the top left in the menu bar listed as “Morph-XXXX” where "XXXX" is the last four numbers of the serial number.
0 Comments